HoldPeak HP-770HC Digital Multimeter Tester True RMS Smart Autoranging Probe With NCV+HP-605A Clamp Adapter 600A AC/DC Current
HoldPeak HP-770HC Digital Multimeter Tester True RMS Smart Autoranging Probe With NCV+HP-605A Clamp Adapter 600A AC/DC Current
SPECIFICATIONS
AC Voltage: 60mV/600mV/6V/60V/600V/1000V
Battery Included: no
Brand Name: HoldPeak
Certification: NONE
DC Voltage: 60mV/600mV/6V/60V/600V/750V
DIY Supplies: Electrical
HOLDPEAK Model: HP-770HC
High-concerned chemical: none
Is Smart Device: no
Model Number: HP-770HC+HP-605A
Operating Mode: Auto Range
Origin: Mainland China
Semi-finishedproduct: No
function: 770HC is the HP-890CN
Item Name: HoldPeak HP-770HC Digital Multimeter
About this item
Non Contact Voltage Test(NCV): When the detection of voltage is greater than 90V(RMS), keep close to the conductor, the instrument sensor will light and buzz.
Over load protection & continuity test: use the ptc protection circuit for resistance, temperature and frequency measurement. If measured resistance less than 100Ω, the buzzer will sound.
Auto-ranging & auto-power off: dc & ac current ( 600A range with ac/dc current clamp adapter), resistance, capacitor, frequency, duty cycle, temperature, transistor hfe.
Low battery indication & blacklit lcd: 3 1/2 digit lcd display for visibility in dimly lit areas. Feature a low battery indicator so you never accidentally run out of juice.
Accurately measures AC/DC Voltage; AC/DC Current; Resistance, Capacitor, Frequency and Temperature.
Transistor hFE Test/ Non Contact AC Voltage (NCV) Test/ Diode assembly Test.
Features Data Hold, LED Auto Back Light, Auto Power Off, Continuity Buzzer, °C and ℉ Select; True RMS.
With Function Switch Indication Lamp, Mechanical Blocking System, Max/Min and Relative Value Test.
Basic Function:
● Max LCD Display: 6000 Counts Digit.
● DC Voltage Range: 60mV/600mV/6V/60V/600V/1000V
● AC Voltage Range: 60mV/600mV/6V/60V/600V/750V
● DC Current Range: 600uA/6000uA/60mA/600mA/6A/20A
● AC Current Range: 600uA/6000uA/60mA/600mA/6A/20A
● Capacitor: 9.999nF ~99.99mF
● Frequency: 9.99Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz
● Resistance Range: 600/6K/60K/600K/6M/60M
● Temperature Range: -20°C ~ 1000°C/(-4 ~1832℉)
● Duty Cycle: 0.1% ~ 99.9%
● Transistor hFE Test Range: 0 ~1000; Ib=10µA, Vce=1.8V Approx.
● Weight: 1.8 pounds
● Dimension: 7.7 x 3.5 x 1.6 inches
Iterm Name: HoldPeak HP-605A AC/DC Clamp Adapter
About this item
【AC/DC 600A Clamp-on Probe】Capable of measuring AC/DC up to 600 amps, BT-605A clamp adapter is built for higher current measurement.
【Great Companion to DMMs】1mV per ampere output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity.
【Accurate Ampere Measurement】+/- 3.0%+10 accuracy for signal output conversion. The arrow on the Jaw indicates the DC current direction of positive current flow ( from positive to negative)
【Easy to Use】Maximum Jaw Caliber Size up to 1.77 inches (45mm), allows you to make accurate AC or DC amperage measurement up to 600 amps without breaking the circuit.
【Tips】Putting an amp-clamp on a power cord wouldn’t get a reading, you’ll need to put an amp clamp around the live wire only, or use an “AC line splitter”.
Basic Function:
● DC Current: 600 A
● AC Current: 600 A
● Jaw Caliber: 1.77inch
● Output Conversion: 1mV/1A
● Conversion Accuracy: +/- 3.0% + 5 digits
● Output Impedance: 10K
● Dimension: 7.05*3.54*1.42 inch
Tips for HP-605A:
▶Perfectly work with HOLDPEAK multimeters, such as: HP-770M, HP-770N, HP-770K, HP-90EPD, HP-90EPC, HP-6688G, HP-6688H, etc.
▶When perform DC current measurement, always press “REL” key on multimeter to zeroes it out.
▶When perform AC current measurement, always use the clamp go round the live wire only, or use "AC line splitter"
▶Connect the black banana plug of the BT-605A AC/DC Current Clamp Adapter to "COM" port and the red banana plug to the "µA mA" port.
▶Press “SELECT” button on the multimeter and press AC/DC button on the Clamp Adapter to choose “DC” or “AC” measurement .
▶The arrow on the right side of the Jaw indicates the DC current direction of positive current flow ( from positive to negative ).
